Pair with a phone or tablet on the Brother PT-P710BT
Step by step
- Turn the printer on.
- On the phone: Settings → turn Bluetooth on.
- Select PT-P710BT**** (**** = last four digits of the serial number inside the Cassette Cover, under the cassette).
- If asked for a PIN, enter 0000.
- Open iPrint&Label or P-touch Design&Print 2 and select this printer.
Notes
- The cube does not support Wi-Fi.
- If it is not found, it may already be paired with another device. Turn that device's Bluetooth off, or power-cycle the printer.
- If it is not found, make sure it is not in sleep mode.
- Keep the phone close; microwaves and other radio sources can block the link.
More Brother PT-P710BT guides
- Print from a mobile device
- Print from a Windows or Mac computer
- Auto Cut, Chain Printing, Special tape, Mirror
- The 25 mm blank lead-in
- Peel the backing
- Printer Setting Tool (Windows / Mac)
- Update software and firmware
- Clean the Print Head