Charge before first use on the Brady M211
Step by step
- Plug USB-C into the printer.
- Use the supplied AC adapter (at least 15 W) and the regional plug.
- Charge about 2.5 hours. The battery light pulses green, then stays solid green.
Notes
- USB-A ports and weaker adapters charge more slowly.
- If the pack was run completely flat and left unused about four weeks, reconditioning can take 6–8 hours.
More Brady M211 guides
- Power, Bluetooth reset and hard boot
- Connect Express Labels over Bluetooth
- Shutdown time and printer name
- Load an M21 cartridge
- Print from the app
- Auto-cut and the Cut button
- Fit the magnet accessory (M21-MAGNET)
- Clean the printhead, platen and sensor